Owners manual

ADJUSTMENT AND OPERATION
THE TENSION PLACED ON THE TILT SPRINGS DETERMINE THE AMOUNT OF PRESSURE
THAT MUST BE APPLIED TO THE BLADE BEFORE IT FOLDS OVER IF SOMETHING IS HIT.
ADJUST THE SPRINGS BY LOOSENING THE NUTS ON THE EYEBOLTS AND ADJUSTING
UNTIL THE BLADE DOES NOT FOLD OVER DURING NORMAL OPERATION BUT WILL
FOLD IF AN OBJECT IS STRUCK.
IF YOU NEED TO CHANGE THE BLADE ANGLE WHILE OPERATING, COME TO A STOP,
RELEASE THE LOCK ARM. WHEN THE PROPER ANGLE IS ACHIEVED RELEASE THE
LOCK ARM, LOCKING THE BLADE IN PLACE .
PUSH YOUR PLOW AROUND!!
6
Adjust the Skid Shoe by moving
adjustment washers so that it
just touches the ground when
the blade is in the down
position. When blade is installed
on ATV tighten all hardware.