Use and Care Manual

葆 ��
ɩ 
FIGURE 9.1
HITCH See Figure 9.1
1. Loosely assemble the Hitch Tube 14 to the Axle
Weldment 21 using (2) Rear Hitch Gussets 15 , (5)
3/8” X 2-3/4” Bolts 4 and (5) 3/8” Flange Nuts 3 .
2. Loosely assemble the Hitch Tube 14 to the Front
Frame Tube using (2) Hitch Gussets 16 , (7) 3/8” X
2-3/4” Bolts 4 and (7) 3/8” Nuts 3 .
3. Securely tighten the hardware from the previous two
steps.
9
Note: The Item Numbers
on this page refer to the
table on page 7
ASSEMBLY DIRECTIONS