MANUFACTURING QUALITY LAWN CARE EQUIPMENT SINCE 1945 Owner’s Manual Accessories Mount 2646 Extension Kit 2900 Mount Kit Traxter 7119 Mount Kit Outlander 7668 IMPORTANT Read and follow all Safety Precautions and Instructions Before Operating this Equipment. ATV ACCESSORIES Sold as Separate Pieces!!!! ASSEMBLY OPERATION SERVICE AND ADJUSTMENT REPAIR PARTS Made In The USA 1602 CORPORATE DRIVE WARRENSBURG, MISSOURI 64093 PH 660. 747. 8183 FAX 660. 747. 8650 swisherinc.com 2800 REV.
LIMITED WARRANTY The manufacturer’s warranty to the original consumer purchaser is: This product is free from defects in materials and workmanship for a period of one (1) year from the date of purchase by the original consumer purchaser. We will repair or replace, at our discretion, parts found to be defective due to materials or workmanship.
SAFETY PRECAUTIONS & DECALS This Safety Alert Symbol indicates important messages in this manual. When you see this symbol, carefully read the message that follows and be alert to the possibility of personal injury. Read this manual completely. Failure to observe the following safety instructions could result in serious injury or death. Read the manual. Learn to operate this machine safely. Keep the operating speed LOW!!!!! Do not operate over 5 MPH (8KMH).
15 or 16 24 25 1 23 8 7 22 19 17 18 2 9 12 28 26 4 14 21 5 3 20 13 FIGURE 1 Note: Accessory Mount Holes 11 28 9 27 10 6 ITEM NO.
INSTALLATION OF ACCESSORY MOUNT TO ENSURE PROPER INSTALLATION, CAREFULLY FOLLOW ALL INSTRUCTIONS LISTED BELOW MOUNTING BRACKETS Included with your new ATV accessories mount are three sets of mounting brackets for ATV’s. Brackets 18,19 and 20,21 are two sets that will work on most ATV’s. The determining factor is what type of A-arms (lower portion of the front axle) are used on your ATV. If your A-arm is narrow then use bracket set 18, 19. If your A-arm is wide then use bracket set 20,21.
Honda Mounting Instructions Installation Instructions 1. 2. Place U-bracket over rear A-arm bar as shown. Using supplied hardware, assemble plates and brackets. Position the brackets so they allow wheels to turn without contacting the rims (Reference step 10 on page 5) . Front bolt NB619 should be close to the front of the A-arm, contacting it if possible.
Bombardier Outlander Accessory Mount Brackets Kit #7668 3/8 NYLOC NUT HARDWARE AND PARTS 2 - ACCESSORY MOUNT BRACKET 7669TK 2 - ACCESSORY MOUNT WELDMENT 7670TK 4 - 3/8-16 X 2 ½ BOLT NB619 8 - 3/8 SAE WASHER NB272 4 - 3/8 - 16 NYLOC NUT NB182 2 - 5/16 - 18 X 2 BOLT NB507 2 - 5/16 -18 NYLOC NUT NB181 4 - 5/16 SAE WASHER NB275 5/16 NYLOC NUT 5/16 SAE WASHER ACCESSORY MOUNT BRACKET ACCESSORY MOUNT WELDMENT 3/8 X 2 ½ BOLT MOUNTING INSTRUCTIONS 5/16 X 2 BOLT 3/8 SAE WASHER (REFERENCE FIGURE ABOVE, LEFT SIDE
MANUFACTURING QUALITY LAWN CARE EQUIPMENT SINCE 1945 Owner’s Manual ATV ACCESSORIES Accessories Mount 2646 Extension Kit 2900 Mount Kit Traxter 7119 Mount Kit Outlander 7668 WHEN ORDERING PARTS, PLEASE HAVE THE FOLLOWING INORMATION AVAILABLE: * PRODUCT – ________________ * SERIAL NUMBER - _______________ * MODEL NUMBER - _______________ TYPE - _______________ * PART NUMBER WITH PAINT CODE * PART DESCRIPTION TELEPHONE - 1-800-222-8183 FAX - 1-660-747-8650 SWISHER 1602 CORPORATE DRIVE WARRENSBURG, MO 640
