Use and Care Manual

Installation Instructions
1. Place U-bracket over rear A-arm bar as shown.
2. Using supplied hardware, assemble plates and brackets.
Position the brackets so they allow wheels to turn without
contacting the rims (Reference step 10 on page 5) . Front
bolt NB619 should be close to the front of the A-arm,
contacting it if possible.
Honda Mounting Instructions
Bombardier Traxter Mounting Instructions
Bracket
Notched Plate
(Part # 7120)
Spacer (Part # 7121)
INSTALLATION INSTRUCTIONS
Kit # 7119 Required
Same as above with addition of spacer and
guard modification
A Arm Guard Modification
Guard to be modified by Owner
6
Honda A-arm
U-bracket
#2677TK
Mount Bracket Long
#2632TK
3/8 – 16 bolt
#NB-619
Bracket Plate Long
#2634TK
3/8 – 16 Nyloc Nut
#NB182