Owner’s Manual Plow Blade 2850 ATV ACCESSORIES Sold as Separate Pieces!!!! IMPORTANT Read and follow all Safety Precautions and Instructions Before Operating this Equipment.
LIMITED WARRANTY The manufacturer’s warranty to the original consumer purchaser is: This product is free from defects in materials and workmanship for a period of one (1) year from the date of purchase by the original consumer purchaser. We will repair or replace, at our discretion, parts found to be defective due to materials or workmanship.
SAFETY PRECAUTIONS This Safety Alert Symbol indicates important messages in this manual. When you see this symbol, carefully read the message that follows and be alert to the possibility of personal injury. Read this manual completely. Failure to observe the following safety instructions could result in serious injury or death. Read the manual. Learn to operate this machine safely.
TO ENSURE PROPER ASSEMBLY, CAREFULLY FOLLOW ALL INSTRUCTIONS LISTED BELOW REFER TO FIGURES 1 AND 2 WHILE ASSEMBLING THIS PORTION OF THE PLOW ATTACHMENT 1. 2. 3. 4. 5. 6. Unpack parts and make sure all are included. If they are not contact the dealer where the Swisher Plow was purchased. Locate the pivot weldment (2) and assemble to the blade (3) using two ½-13 X 2” bolts (14) two ½-13 nyloc nuts (8) and two bushing (32) as shown.
PLOW ATTACHMENT ASSEMBLY ITEM NO. QTY. PART NO. DESCRIPTION ITEM NO. QTY PART NO.
TO ENSURE PROPER ASSEMBLY AND INSTALLATION, CAREFULLY FOLLOW ALL INSTRUCTIONS LISTED BELOW REFER TO FIGURES 2 AND 3 WHILE ASSEMBLING AND INSTALLING THIS PORTION OF THE PLOW ATTACHMENT The next steps need to be done in sequence: 1. Lay parts down in the order they are shown below. 2. Slide the plow mount (1) into pivot weldment (2), secure with ½-13 X 3 1/2 bolt (34) and ½-13 nyloc nut (8). 3. Assemble the Pivot Latch assembly in the order shown below.
ADJUSTMENT AND OPERATION PUSH YOUR PLOW AROUND!! THE TENSION PLACED ON THE TILT SPRINGS DETERMINE THE AMOUNT OF PRESSURE THAT MUST BE APPLIED TO THE BLADE BEFORE IT FOLDS OVER IF SOMETHING IS HIT. ADJUST THE SPRINGS BY LOOSENING THE NUTS (12) ON THE EYEBOLTS (18) AND ADJUSTING UNTIL THE BLADE DOES NOT FOLD OVER DURING NORMAL OPERATION BUT WILL FOLD IF AN OBJECT IS STRUCK. IF YOU NEED TO CHANGE THE BLADE ANGLE WHILE OPERATING, COME TO A STOP, TURN OFF THE IGNITION AND SET THE PARKING BRAKE.
Owner’s Manual Plow Blade 2850 ATV ACCESSORIES WHEN ORDERING PARTS, PLEASE HAVE THE FOLLOWING INORMATION AVAILABLE: * PRODUCT – ________________ * SERIAL NUMBER - _______________ * MODEL NUMBER - _______________ TYPE - _______________ * PART NUMBER WITH PAINT CODE * PART DESCRIPTION TELEPHONE - 1-800-222-8183 FAX - 1-660-747-8650 IMPORTANT Read and follow all Safety Precautions and Instructions Before Operating this Equipment. SWISHER 1602 CORPORATE DRIVE WARRENSBURG, MO 64093 swisherinc.
