Replacement Part List

ADJUSTMENT AND OPERATION

THE TENSION PLACED ON THE TILT SPRINGS DETERMINE THE AMOUNT OF PRESSURE

THAT MUST BE APPLIED TO THE BLADE BEFORE IT FOLDS OVER IF SOMETHING IS HIT.

ADJUST THE SPRINGS BY LOOSENING THE NUTS (12) ON THE EYEBOLTS (18) AND

ADJUSTING UNTIL THE BLADE DOES NOT FOLD OVER DURING NORMAL OPERATION

BUT WILL FOLD IF AN OBJECT IS STRUCK.

IF YOU NEED TO CHANGE THE BLADE ANGLE WHILE OPERATING, COME TO A STOP,

TURN OFF THE IGNITION AND SET THE PARKING BRAKE. RELEASE THE LOCK ARM

AND ROTATE THE BLADE TO THE DESIRED ANGLE. ENGAGE THE LOCK ARM MAKING

SURE IT IS SECURED INTO ONE OF THE LATCH POSITIONS.

PUSH YOUR PLOW AROUND!!