A TRADITION OF QUALITY 51NCE f945 swisherinc.com OWNER'S MANUAL MODEL LS722H STARTING SERIAL NO. Model LS12534H Shown #: L206-010001 LS728H STARTING SERIAL LOG SPLITTER #: L206-010001 LS10528H STARTING SERIAL #: L206-010001 LS12534H STARTING SERIAL #: L206-010001 LS12534H12V STARTING SERIAL #: L206-010001 IMPORTANT Read and follow all Safety Precautions and Instructions before operating this equipment. _. Rev. 06-164 1602 CORPORATE ..
LIMITED The manufacturer's warranty to the original consumer WARRANTY purchaser is: This product is flee from defects in materials and workmanship for a period of two (2) year fiom the date of purchase by the original consumer purchaser. We will repair or replace, at our discretion, parts lbund to be defective due to materials or workmanship.
SAFETY ( PRECAUTIONS This Safety Alert Symbol indicates important messages in this manual. When you see this symbol, carefully read the message that follows and alert to the possibility of personal injury. be Read this manual completely. This machine can amputate hands, feet, and throw objects. Failure to observe the following safety instructions could result in serious injury or death.
• NEVER operate your splitter near a flame or spark. Hydraulic oil and gasoline are flammable and can explode. • NEVER fill gas tank while the engine is hot or running. Allow the engine to cool before refueling. This unit is equipped with an internal combustion engine and should not be used on or near any unimproved forest-covered, brush-covered or grass-covered land unless the engine's exhaust system is equipped with a spark arrester meeting applicable local or state laws (if any).
TOWING SAFETY Do not allow persons to ride on splitter. Do not carry any cargo or wood on your splitter. It may fall off and endanger vehicles that are following you. Be sure support leg is in the travel position and coupling secure. This must also be retracted so not to interfere while towing. Retract support leg by removing pin, pivoting up, and replacing pin. Never exceed 45 MPH while towing your splitter. Be extra cautious when traveling over rough terrain, especially over railroad tracks.
ASSEMBLY This log splitter has been partially assembled at the factory. Refer to the drawings and part lists should it become necessary to disassemble the unit tbr repair or replacement of parts. Inspect all components tbr damage. If you believe you have a damaged part please contact customer service immediately at 1-800-222-8183. WARNING: Exercise extreme caution, as parts are very heavy. Sufficient persons or mechanical handling equipment should be used.
COLD WEATHER START UP The Cold Weather Clutch enables the engine to be started without having to pull through thickened hydraulic fluid. Simply pull the handle out into locked position. Start engine, and release Cold Weather Clutch. After starting, assure that the lever has reengaged. cold, let it warm up, SPLITTER OPERATION 1. Set up the log splitter in a clear, level area and block the wheels. The suction port on the tank should always be on the lower side of the log splitter. 2.
MAINTENANCE AND STORAGE WARNING: DISCONNECT THE SPARK PLUG BEFORE PERFORMING ANY MAINTENANCE. Consult the operating and maintenance instructions of the engine manufacturer tbr engine care. Always check the oil level of the hydraulic reservoir before operation. Operating without an adequate oil supply will cause severe damage to the pump. Change the hydraulic fluid in tile reservoir after every 1O0 hours of operation.
SAFETY DECALS Replace decals immediately if damaged.
DETAIL B /""'SEE ENGINE DETAIL A SEE PUMP DETAIL UE D_IL ASSEMBLY LS7522H, DETAIL LS728H, LS10528H 10 & LS12534B MODELS
SERVICE PARTS Please have Model Color and Serial cannot Numbers be guaranteed ITEM NUMBER ready upon when service ordering parts. parts.
Bemn BEAM NOT DETAIL ALL Weldment 12399TC Shown - ALL MODELS ITEM NUMBER PARTS ARE ON ALL DESCRIPTION 1 Beam Weldment - Model LS722H, LS728H & LS10528H Beam Weldment - Model LS12534H & LS12534H12V 12465TC 12399TC 7233TK 3 Wedge Weldment Thick GIB Plate 4 5 Thin GIB Plate (LS12534H & LS12534H12V Only) Bottom GIB Plate 7388TK 7333TK 6 NB643 7 1/2-13 X2 1/2 GR5 Carriage Bolt 1/2 Lock Washer 8 9 1/2-13 Nut 1/2-13 X3 1/2 GR5 ZP NB213Z NB577 10 Washer TR 150W 2 MODELS PART NUMBER 723
BEAM LOCKING PIN DETAIL TONGUE DETAIL ALL MODELS ITEM NUMBER DESCRIPTION PART NUMBER 1 2 3 4 5 6 7 Tongue Weldment 2" Ball Coupler Folding Support Leg Safety Chain w/Hook Bolt 3/8-16 X4 GR5 Bolt 3/8-16 X3 1/2 GR5 Bolt 3/8-16 X3 GR5 12353TK 7365 11494TK 7366 NB645 NB649 NB150 8 9 10 Latch Pin Guide Bushing Washer Fender 3/8 Washer SAE 3/8 7840Z 10177 NB272 11 12 Nut 3/8-16 Nyloc 1/2 X3 Bent Pin w/Hair Pin NB182 NB606 13 14 15 1/2 Bent Locking Pin Compression Spring Cotter Pin 1/8 X 1 12345 1
ENGINE DETAIL MODEL LS10528H & LS12534H ITEM # DESCRIPTION 1 Engine N/A 2 Bolt 5/16-18 X 1 1/4 Serr. Flange Bolt 5/16-18 X 1 3/4 Serr. Flange(One Per- 12 Volt Bqgines) NB253 NB515 3 4 Nut 5/16-18 Serr. Flange Upper Spacer NB170 689S 5 Engine Pulley BB105 6 7 Lower Spacer Washer 689L TR150W 8 9 Washer Belleville Bolt 7/16-20 X 1 GR 5 w/Loctite 699 NB452N 10 1/4 X 1 Keystock 9031 Fuel Shut Off Valve (Inline) Fuel Line Clamp 7414 6FLC NOTSHOWN NOTSHOWN PART # \ 10 / 9 ENGINE DE
12 Volt Accessories BATTERY 2 10 8 9 ITEM # DESCRIPTION PART # 1 2 3 Throttle & Key Switch Bracket Throttle Cable Throttle Knob 12491TK 686N 686K 4 Battery Hold Down Strap 12498TK 5 6 Nut 3/8-16 Nyloc Bolt 3/8-16 X 7 NB181 NB732 7 8 Solenoid Bracket Bolt 5/16-18 X 3/4 9913TK NB143 NOTSHOW N Nut 5/16-18 Serr Flange NB 170 9 NOTSHOWN Bolt 1/4-20 Serr Flange Nut 1/4-20 Serr Flange NB109 NB524 10 NOTSHOWN NOTSHOWN NOTSHOWN Key Switch 3623 Wiring Harness Solenoid Assembly Nut M6-1.
Idler Pulley Pump Pulley, \ Engine Pulley BELT ROUTING DIAGRAM (VIEWED FROM UNDERSIDE OF SPLITTER) TROUBLESHOOTING 16
TROUBLESHOOTING CONTINUED Problem Cause Remedy ...................................... Leaking CY!inder............................................................ 1 .................................................................................................................................................. nter:........................................... 2. Scored cylinder. 2. See authorized service center. 12 Volt Units ...... En0ine wi!! n°t turn °_r ........................or dead battery:.......
SPECIFICATIONS Models LS10528H LS722H LS728H Splitting Force 22 Tons 28 Tons 28 Tons 34 Tons Engine 6.5 HP Briggs and Stratton Quantum 7 HP Briggs and Stratton INTEK 10.5 HP Briggs and Stratton I/C 12.
SWISHER HISTORY Back before electricity came to rural Missouri Max Swisher was producing lawn mowers from his mother's chicken house. Max never liked to mow grass. He installed a gearbox on his family's lawn mower creating a self-propelled unit. By tying one end of a rope to the mower and the other end to a tree in the center of the yard the mower circled the tree, shortening the rope and guiding the mower in concentric circles. Max enjoyed relaxing under a shade tree while his invention did all the work.
i2Z29511N92 A TRADITION OF QUALITY 51NCE f945 LOG SPLITTER OWNER'S MANUAL HOW TO ORDER REPAIR PARTS: MODEL NO. LS722H LS728H LS10528H LS12534H LS12534H12V Each Log Splitter has its own serial number. Each engine has its own serial number. The serial number tbr the Log Splitter will be tbund on the right hand side of the hydraulic oil reservoir. The serial number for the engine will be Ibund on the top of the blower fan housing.
