User Guide

OPERATING YOUR NEW PC-300

INTENDED USE

•

This machine is designed for moving objects and other materials normally moved by a

wheelbarrow.

• The three-speed transaxle system with engagement bail and forward/reverse

control delivers smooth steady performance.

• The dump latch allows for easy dumping and offers a spring-loaded return of the

latch mechanism when the bed is returned from the dump position.

• The PC-300 is designed to carry 300 pounds- DO NOT EXCEED

MANUFACTURER’S SET WEIGHT LIMIT!

Assembly of PC 300

•

Remove PC300 from crate. Be careful not to damage the idler cable (item 31, p 8).

• Align holes in handle and frame and bolt together using; (4) NB604, 3/8 – 16 X 1”

bolt, (8) NB271, 3/8 USS washer, (4) NB182, 3/8 – 16 Nyloc nut.

• Bolt bed lift handle to bed using; (4) NB604, 3/8 – 16 X 1 bolt, (4) NB272, 3/8 SAE

washer and (4) NB271, 3/8 USS washer, (4) NB182, 3/8 – 16 Nyloc nut. Place the

smaller washer (NB272) on the outside of the handle.

• Assemble (2) NB139, ¼ - 20 hex nuts to modified J-bolts (item 26, p 8), nuts should

be tightened against the end of the bolt threads. Reference Shift Rod/Handle detail

p. 8 and secure J-bolts to the handle, shift rod weldment (item 25, p 8) and shift rod

half (item 13, p 9) using (2) NB180, ¼ - 20 Nyloc nuts.

The operation of any equipment can encounter foreign objects which could be

thrown into the eyes, resulting in severe eye damage. Always wear certified safety

glasses or wide-vision safety goggles over spectacles before starting machine and

while operating such a machine.

The operation of any engine produces sound waves that are damaging to the

human ear. Ear protection is recommended.

CAUTION!

Tragic accidents can occur if the operator is not alert to the presence of

children. Children are often attracted to the machine and the hauling

activity.

Never assume that children will remain where you last saw them.

SLOPE OPERATION!

Use extra caution when operating on slopes. Operate self-propelled units

up and down slopes. There is a significant risk of overturns when

operating across slopes. If you feel uneasy on a slope then

do not

operate on it.