Visit us at" www.swisherinc.com OWNER'S MANUAL MODEL Trim-N-Mow NO. ST50022STDQ ST60022Q ST60022DXQ12RK ST65022Q ST65022DXQ ST6002212V Trim-Max _ IMPORTANT Read and follow all Safety Precautions and Instructions before operating this equipment. Rev 04-096 1602 CORPORATE Manufacturing OTRIMSTD03 Assembly Operation Service and Adjustment Repair Parts DRIVE, P.O.
LIMITED The manufacturer's materials warranty and workmanship purchaser. We will repair workmanship. 1) Engine for a period or replace, This warranty Warranty to the original WARRANTY consumer purchaser of two (2) years at our discretion, is subject utilized Mower warranty. The Briggs 3723. 2) CommercialUse This product manufacturer. of the engine & Stratton Engine is not intendedfor by the original due to materials have a separate Co., Inc.
Safety Instructions This Safety Alert Symbol indicates important messages in this manual. When you see this symbol, carefully read the message follows and be alert to the possibility of personal injury. • • • • • ] tha j Read, understand and follow all instructions in the manual and on the trimmer before starting Read this manual carefully. Become familiar with the controls and how to operate the unit properly.
Slope Operation I • • • • • • which can result in severe injury. All slopes require extra caution. If you feel uneasy on it do not trim it. DO: Trim across the face of a slope and not up and down. DO: Remove objects such as rocks, tree limbs, etc. DO: Watch for holes, ruts or bumps. Tall grass can hide obstacles. DO NOT: Mow neardrop-offs, ditches or embankments. The operator loose footing or balance. DO NOT: Trim excessively steep slopes DO NOT: Trim on wet grass. Reduced footing could cause slipping.
___ severe eye damage. spectacles _The j_ betbre operation protection ) Always staring wear certified safety glasses any cutting machine of any cutter produces sound waves or wide-vision and while operating that are damaging safety goggles t_r over such a machine. to the human ear. Ear is recommended.
Assembly Contents of Box: • Trimmer • • • • • • Parts bag containing: Manual Engine manual Safety goggles Bottle of engine oil 4 sets of .155 trimmer line Tools Required: • ½" wrench Installation Handle Adjustment of handles • Remove loose fasteners from lower handles. • • Pivot handles up and align lower hole in handles with hole on trimmer frame. Install hardware removed in previous step. Snug, but do not tighten bolts. Pivot upper handles to fit the lower handles. Tighten knobs.
Preparing with oil. Unit For First Use • Fill engine crankcase NOT OVERFILL. A bottle has • Fill the engine fuel tank with gasoline. OUTSIDE IN AWELL-VENTILATED • Check to ensure string has been installed just above the wheel for proper installation. been GASOLINE AREA. properly. provided with SHOULD A diagram this unit. DO BE ADDED is provided Operation Important! To ensure proper operation, clean the engine and trimmer regularly. See page for details.
Installing String Important! Use the proper length of string. cause stalling and unacceptable operation. Using a string too long for the unit will 3 - 5 HP use 16" String 5+ HP use 18" String • • • • Loosely fold string Place loop of string Bring ends around Pull ends to tighten Trim-Max in half. against outside of loop on the trimmer head. and through the loop and over the string loop. loop.
Trimmer Make sure guidelines • • • • • • your trimmer in mind every is in safe time you Maintenance working condition use your trimmer. by keeping the following Keep trimmer in good operating condition and keep all guards and shields in place. DO NOT operate this trimmer if any of the shields and guards are missing. Check all fasteners for secure fit to keep equipment in safe working order. Make adjustments as necessary. To reduce fire hazards, keep engine free of grass leaves or excessive grease.
Trim-N-Mow 17 16 14" Wheel Part # 2002 14 13 3 12 6 l'%_ ./ ...._::_i_:_.
Trimmer Assembly Head for Standard 7 2 4 11 5 6 3 5/8 ID X 10D 14 GA Washer NB149 ................................... 5........................................................................................................ Co mp re ssi0n Sp ring ............................................................. 2033 .............................. 6 Head Weldment SUBSTD-A 7 Std Trimmer Stabilizer Weldment 2032 lO 9 Trimmer Spinner Disc Weldment 2021 10................................................
Trim-Max Axle Setup 7 Deluxe Axle 12 Volt Deluxe Axle 12
Deluxe 16 14 Paint Reference Chart Color Paint Code Texture Black Texture Red TK TC 18 2 25 24 20 19 23 6 9 lO See Detail Page 11 24 7 Item # 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 Description Briggs & Stratton Engine Engine Pulley- 6" Sheild Strap Acrylic Shield Belt Guard Blade Belt Lower Shield Sub Assy.
12 Volt Deluxe Paint Reference Chart Color Texture Black Texture Red Paint Code TK TC For Additional Parts See Page 13 Item # 1 2 3 Not S hown Not Shown Not Shown Description 12 Volt Handle Sub-Assy- Lower Battery for Weedtrimmer Battery Cover Wiring Harness Key Switch Keys For Key Switch (set of two) 14 Part # 2089-12V 2101 2105 2120B 2102 KSK
Notes 15
Visit us at: www.swisherinc.com Each trimmer has its own model number. Each engine has its own model number. The model number tbr the trimmer will be found on the right hand side of the drive belt housing. The model number for the engine will be found on the top of the blower fan housing. All trimmer parts listed herein may be ordered directly from Swisher Mower & Machine Co. Inc. or your nearest Swisher dealer. OWNER'S MANUAL MODEL All engine parts may be ordered NO.