Replacement Part List

Handle Adjustment

Contents of Box:

•

Trimmer

Parts bag containing:

• Manual

• Engine manual

• Safety goggles

• Bottle of engine oil

• 2 sets of .155 trimmer line

• Cable Clip

Tools Required:

• ½” wrench

Installation of handles:

• Remove loose fasteners from lower handles.

• Pivot handles up and align lower hole in handles with hole on trimmer frame. Install

hardware removed in previous step. Snug, but do not tighten bolts.

• Pivot upper handles to fit the lower handles. Tighten knobs.

• Adjust handles for comfortable operation.

• Tighten all bolts.

Handles may be adjusted up and down and in and out for comfortable operation.

Installation of Wheels for Trim-Max

Refer to Page 12 for illustration.

• Slide axle through the mounting plates.

• Install conical springs with the large diameter side against the axle plate.

• Install spring retainer against the conical spring.

• Slip wheel on one side and install cotter pin.

• Bend cotter pin over to prevent it from falling out.

• Push the axle completely over to the other side.

• Install the second wheel and insert cotter pin and bend. Some compression of the

conical spring is necessary.

Assembly