swisherinc.
LIMITED WARRANTY The manufacturer’s warranty to the original consumer purchaser is: This product is free from defects in materials and workmanship for a period of one (1) year from the date of purchase by the original consumer purchaser. We will repair or replace, at our discretion, parts found to be defective due to materials or workmanship.
Parts List Before assembling your string trimmer guard please check the table and diagram below to familiarize yourself with the parts and to make sure no parts are missing. Item # 1 2 3 4 5 6 7 8 9 10 Part # NB181 2074 19040TK 2042 NB524 NB274 NB690 26X249 NB579 19038 Description Nut - Nyloc 5/16-18 Clamp Weldment - Guard Mount Guard - String Nut - Serr Flange, 1/4-20 Washer - SAE Flat 1/4 Bolt - Serr Flange, 1/4-20 X 3/4 Screw - .312-18 X .75 Washer - Fender 5/16 X 1.
Hardware required for assembly: 1/2” Box End Wrench 3/8” Wrench Remove the three screws that fasten the belt guard. Discard these screws and set the belt guard aside.
Loosely fasten the string guard to the trimmer head assembly using clamp 2074 and two NB181 nuts. Make sure the holes in the brackets line up, then securely tighten the clamp.
Place the belt guard back on the trimmer and fasten the two sides using washer NB274 and bolt NB690. The bolt will engage cage nut 19038. Fasten the front of the belt guard using washer NB274, bolt NB690 and nut NB524. NB524 needs to be placed behind the bracket on the trimmer head. Make sure all hardware is tightened securely.
swisherinc.com OWNER’S MANUAL STGUARD22 String Trimmer Guard Kit WHEN ORDERING PARTS, PLEASE HAVE THE FOLLOWING INFORMATION AVAILABLE: * PRODUCT – ________________ * SERIAL NUMBER - _______________ * MODEL NUMBER - _______________ TYPE - _______________ * PART NUMBER WITH PAINT CODE * PART DESCRIPTION TELEPHONE - 1-800-222-8183 FAX - 1-660-747-8650 SWISHER 1602 CORPORATE DRIVE WARRENSBURG, MO 64093 swisherinc.
swisherinc.com MANUEL DU PROPRIÉTAIRE STGUARD22 Kit de protection de tondeuse à fouet Numéro de série de départ : L313-112001 CHANGEANT VOTRE PAYSAGE DEPUIS 1945 SWISHER 1602 CORPORATE DRIVE, WARRENSBURG, MISSOURI 64093 TÉLÉPHONE 660-747-8183 TÉLÉCOPIEUR 660-747-8650 19041 REV 13-079 Fabriqué aux É.-U.
GARANTIE LIMITÉE La garantie du fabricant pour l'acheteur original est : Ce produit est libre de défauts dans les matériaux et la main-d'œuvre pour une période d'un (1) an à partir de la date d'achat par l'acheteur original. Nous réparerons ou remplacerons, à notre discrétion, toute pièce trouvée défectueuse à cause des matériaux ou de la main-d'œuvre.
Liste des pièces Avant d'assembler votre protection de tondeuse à fouet, veuillez vérifier le tableau et le diagramme ci-dessous pour vous familiariser avec les pièces et vous s'assurer qu'aucune n'est manquante.
Matériel requis pour l'assemblage : Clé avec bout en boîte 12,7 mm (0,5 po) Clé 9,53 mm (3/8 po) Enlevez les trois vis et fixez la protection de la courroie. Mettez de côté ces vis ainsi que la protection de la courroie.
Fixez mollement la protection de la courroie à l'assemblage de la tête de la tondeuse en utilisant la pince 2074 et deux écrous NB181. Assurez-vous que les trous dans les supports soient alignés, puis bien serrer la pince.
Replacez la protection de la courroie sur la tondeuse et serrez les deux côtés en utilisant la rondelle NB274 et le boulon NB690. Le boulon se fixe dans l'écrou cage 19038. Serrez le devant de la protection de la courroie en utilisant la rondelle NB274, le boulon NB690 et l'écrou NB524. La pièce NB524 doit être placée derrière le support sur la tête de la tondeuse. Assurez-vous que tout le matériel soit bien fixé.
7
swisherinc.com MANUEL DU PROPRIÉTAIRE STGUARD22 Kit de protection de tondeuse à fouet LORS DE COMMANDES DE PIÈCES, VEUILLEZ AVOIR L'INFORMATION SUIVANTE EST DISPONIBLE : * PRODUIT – __________ * NUMÉRO SÉRIE - __________ * NUMÉRO DU MODÈLE - __________ TYPE - __________ * NUMÉRO DE LA PIÈCE AVEC CODE DE PEINTURE * DESCRIPTION DE LA PIÈCE TÉLÉPHONE - 1-800-222-8183 TÉLÉCOPIEUR - 1-660-747-8650 SWISHER 1602 CORPORATE DRIVE WARRENSBURG, MO 64093 swisherinc.
swisherinc.com MANUAL DEL USUARIO STGUARD22 Juego de cubierta protectora para bordeadora Número de serie inicial: L313-112001 CAMBIANDO SU PAISAJE DESDE 1945 19041 REV 13-079 SWISHER Hecho en 1602 CORPORATE DRIVE, WARRENSBURG, MISSOURI 64093 TELÉFONO 660-747-8183 FAX 660-747-8650 EE.UU.
GARANTÍA LIMITADA La garantía del fabricante para el comprador original es: Este producto no debe tener defectos de materiales y mano de obra por un término de un (1) año a partir de la fecha de compra original. Nosotros repararemos o reemplazaremos, a nuestro criterio, las partes que presenten defectos de material o de mano de obra.
Lista de partes Antes de armar su cubierta protectora para bordeadora revise la tabla y el diagrama a continuación para familiarizarse con las partes y para verificar que no falte ninguna parte.
Herramientas necesarias para el armado: Llave tubo de 1/2" Llave de 3/8” Saque los tres tornillos que sujetan la cubierta de la correa. Deseche esos tornillos y deje la cubierta de la correa a un lado.
Sujete de forma provisoria la cubierta protectora al cabezal de la bordeadora con el gancho 2074 y dos tuercas NB181. Verifique que los orificios queden alineados, luego ajuste bien el gancho.
Vuelva a colocar la cubierta de la correa en la bordeaddora y ajuste ambos lados con las arandelas NB274 y los pernos NB690. El perno se acopla con la tuerca 19038. Ajuste el frente de la cubierta de la correa con una arandela NB274, un perno NB690 y una tuerca NB524. La NB524 debe colocarse detrás del gancho en el cabezal de la bordeadora. Verifique que todos los pernos estén bien ajustados.
7
swisherinc.com MANUAL DEL USUARIO STGUARD22 Juego de cubierta protectora para bordeadora AL COMPRAR PARTES, TENGA LA SIGUIENTE INFORMACIÓN DISPONIBLE: * PRODUCTO – ___________ * NÚMERO DE SERIE - ___________ * NÚMERO DE MODELO - ___________ * TIPO - ___________ * NÚMERO DE PARTE CON CÓDIGO DE PINTURA * DESCRIPCIÓN DE LA PARTE TELÉFONO - 1-800-222-8183 FAX - 1-660-747-8650 SWISHER 1602 CORPORATE DRIVE WARRENSBURG, MO 64093 swisherinc.