Use and Care Guide

PARTS BREAKDOWN
14
14
RIGHT BLADE DRIVER
LEFT BLADE DRIVER
CENTER BLADE DRIVER
Note:
Torques for bolt numbers 10 & 11
should be set at 35 ft./lbs.
Torque settings for nut number 1
should be set at 35 ft./lbs.
Item # Part # Description Qty. Item # Part # Description Qty.
1 NB175 Nut - Jam, 3/4-16; GR2 3 20667 Blade - G6 Gator, 18.5" (54" Deck) 3
2 AS155 Washer - Belleville, 3/4 x 1 1/2 x .098 3 20186 Blade - G6 Gator, 20.5" (60" Deck) 3
B4104* Pulley - Blade 4.5" (54" & 60" Decks) 4 20115 Blade - G6 Gator, 22.5" (66" DecK) 3
3785 Pulley - Blade 5" (66" Deck) 4 10 NB166 Bolt - 3/8-24 x 1 1/4; GR5, ZY 6
4 NB179 3/4 ID X 1 1/4 OD 18 GA Washer 7 11 NB238N Bolt - HHc, 3/8-24 x 1; GR5, Nyloc 3
5 B98 Bearing - Blade 6 12 NB607 Washer - SP Belleville, .413 x .945 x .118 3
6 9077 Shaft - Blade 5", Long Shoulder 1 13 NB216 Nut - Two Way Lock, 3/8-24; GR A, ZY 6
7 19924* Blade Driver - Cast Iron Txt Blk 3 14 13182 Bolt - Serr Flange, 1/4-20 x 1; GR5 12
8 9008 Plate - Blade Mount 3 15 NB524 Nut - Serr Flange, 1/4-20; Case Hard, ZY 12
16 12823 Spacer - 3/4 ID x 1, Powder Metal 1
17 9078 Shaft - Blade 6", Long Shoulder 2
18 18620 Spacer - Pulley, Deck Idler 1
3
9
When ordering replacement parts
*USE PAINT CODE: TK=BLACK