Use and Care Guide

PARTS BREAKDOWN
16
16
Notes:
-Torque specs for lug nuts number 2 should be
set at 40 ft./lbs.
-Nut number 10 should not be fastened tightly. It
should only be tight enough to engage the Nyloc
nut but also allow the caster (#4) to spin freely.
There should be no up and down axial
movement in the caster once fastened.
-Bolt & nut numbers 5 & 6 should also not be
fastened tightly. They should be tight enough
that the bolt has no axial movement side to side
but also allow the wheel (#3) to spin freely.
Item # Part # Description Qty.
1 18784 Tire/Wheel - 20 x 10-10; Spoked, Blk 2
2 2203LN Nut - Lug, Wheel Hub, 1/2-20; GR5, ZY 8
3 18785 Tire/Wheel - 12/600 x 6-4Ply; Smooth, Blk 2
18816* Weldment - Caster, 3/8" (54" Deck) 2
18886* Weldment - Caster, 1/2" (60" & 66" Decks) 2
14430 Bolt - 5/8-11 x 8 (54" Deck) 2
18953 Bolt - 5/8-11 X 8 1/2 (60" & 66" Decks) 2
6 NB595 Nut - 2-way Jam Lock, 5/8-11; GR A 2
7 B98 Bearing - Blade 4
8 NB195 Washer - 13/16 x 1 1/4 x ⅛; Mild, ZY 4
9 17X195 Washer - Flat 2
10 NB313 Nut - Myloc Jam, 3/4-10 2
11 094618 Cap - Hub 2
5
4
When ordering replacement parts
*USE PAINT CODE: TK=BLACK