Use and Care Manual
Table Of Contents
- Cover
- Warranty
- Table of Contents
- Introduction
- Uncrating & Assembly
- Symbols & Decals
- Safety Instructions 1
- Safety Instructions 2
- Safety Instructions 3
- Customer Responsibilities 1
- Charging Tips
- Customer Responsibilities 2
- Specifications
- Maintenance Schedule
- Operation & Features 1
- Operation & Features 2
- Operation & Features 3
- Operation & Features 4
- Service & Adjustments 1
- Service & Adjustments 2
- Service & Adjustments 3
- Service & Adjustments 4
- Wiring Schematics 1
- Wiring Schematics 2
- Wiring Schematics 3
- Frame Detail
- ROPS Detail
- Idler Detail 1
- Hydro Detail
- Engine Detail
- Deck Lift Detail
- Handle Detail
- Seat Detail
- Brake Detail
- Deck Detail
- Idler Detail 2
- Blade Driver Detail
- Fender Detail
- Wheel & Caster Detail
- Troubleshooting 1
- Troubleshooting 2
- Mower Identification
- Replacement Parts
- Swisher History

CUSTOMER RESPONSIBILITIES
V-Belts:
Check V-belts for deterioration and wear before each use and replace if necessary. Replace belts if they begin to
slip from wear. SEE SPECIFICATION for belt part numbers and SERVICE section of this manual for instructions
on how to replace the belt.
Engine:
REFER TO YOUR ENGINE OWNERS MANUAL.
Overall Unit Care:
Reduce the risk of fire by removing grass, leaves and other debris that may have accumulated on the
machine.
Allow the machine time to cool before cleaning or putting it in storage.
Wash mower periodically. Clean above and below deck.
Keep all electrical connections clean and tight.
Driving & Transport on Public Roads:
Check applicable road traffic regulations before driving and transporting on public roads.
If the machine is transported, you should always use approved fastening equipment and ensure that the
machine is well anchored to the towing vehicle.
The cutting deck should also be lowered to the lowest position and the parking brake engaged during transport.
Three 22 ½” Gator™ Mulching Blade SystemBLADES
FRONT: 12 X 6 X 6 w/ 5/8 Bearing / REAR: 20 X 10 X 10TIRE SIZE
27 ±3 ft. lbsHYDRO BOLT TORQUE
Welded / 2 x 2 x 3/16” Wall Steel Tubing FRONT AXLE
Foot Operated, Spring AssistedDECK LIFT
18” Back w/ Arm Rest / 4” Adjustable Slide / Seat BeltSEAT
Commercial Grade Hydro-Gear ZT-2800TRANSMISSION
Manual LeverPARKING BRAKE
Approximately 1.5” – 5”CUTTING HEIGHT
66”DECK WIDTH
LENGTH: 81”
WIDTH: 76.5” (Including Grass Chute)
HEIGHT: 66 ½” / 46” (w/ ROPS folded down)
WEIGHT: 860 lbs
UNIT MEASUREMENTS
35 ft. lbsBLADE BOLT TORQUE
12V / Heavy Duty 300 CCA / Type U1LBATTERY
FRONT: 40 psi Max / REAR: 22 psi MaxTIRE PRESSURE
0 – 8 mphGROUND SPEED
SEE ENGINE MANUALSPARK PLUG
SEE ENGINE MANUALOIL TYPE (SPI-SF-SJ):
DUAL 4.0 GAL TANKS; UNLEADED REGULARGASOLINE CAPACITY AND TYPE
12
12
Specifications