Use and Care Manual

OPERATION & FEATURES
1. Throttle Control – Used to control Engine
Speed.
2. Hour Meter – Indicates hours of operation.
3. PTO Switch – Used to engage or disengage
the deck blades.
4. Ignition Switch – Used to start or stop the
engine.
5. Deck Lift Pedal – Used to raise and lower
the cutting deck.
6. Control Lever – Sets the speed of the
mower in both the forward and reverse
directions and also turns the mower.
7. Hydro Bypass – Engages transmissions for
normal operation and disengages
transmissions for pushing or pulling the unit.
8. Fuel Tanks – Dual 4.0 gal.
9. Seat Slide
10. Battery
11. Discharge Chute
12. Front Receiver Hitch
13. Rear Receiver Hitch (Not Shown)
14. Brake Lever
15. Toolbox / Storage compartment
14
14
1
3
2
4
5
6
8
10
9
11
12
13
14
15
8
7