Use and Care Manual
Table Of Contents
- Cover
- Warranty
- Table of Contents
- Introduction
- Uncrating & Assembly
- Symbols & Decals
- Safety Instructions 1
- Safety Instructions 2
- Safety Instructions 3
- Customer Responsibilities 1
- Charging Tips
- Customer Responsibilities 2
- Specifications
- Maintenance Schedule
- Operation & Features 1
- Operation & Features 2
- Operation & Features 3
- Operation & Features 4
- Service & Adjustments 1
- Service & Adjustments 2
- Service & Adjustments 3
- Service & Adjustments 4
- Wiring Schematics 1
- Wiring Schematics 2
- Wiring Schematics 3
- Frame Detail
- ROPS Detail
- Idler Detail 1
- Hydro Detail
- Engine Detail
- Deck Lift Detail
- Handle Detail
- Seat Detail
- Brake Detail
- Deck Detail
- Idler Detail 2
- Blade Driver Detail
- Fender Detail
- Wheel & Caster Detail
- Troubleshooting 1
- Troubleshooting 2
- Mower Identification
- Replacement Parts
- Swisher History
OPERATION & FEATURES
Left Control Panel Right Control Panel
15
15
1. PTO / Blade Engagement Switch
2. Hour Meter – Indicates hours of operation
3. Safety Starting Interlock Switch
4. Key Switch
5. Choke Cable (Only on 24HP Kawasaki
Engines & 24HP Briggs & Stratton Engines)
6. Throttle Control Cable
7. 12V Accessory Outlet Plug
8. Starting Instructions Decal
9. Accessory hole for On/Off Toggle Switch
(P/N 18782)
1 3 2 9 4 8 6 5 7
Starting:
Starting Instructions are also included on the right side control panel decal.
Before starting the vehicle, be sure all people are clear of the area.
Operator must be sitting in the seat. Control handles must be in the neutral (vertical) position.
PTO must be in the disengage position (pushed down). Brake must be engaged.
Depress interlock button on left control panel and turn ignition key simultaneously until engine runs.
Once started, set engine RPM to maximum (Fast) and then engage the blades.
NOTE:
If you have never used a Zero Turn mower before, refer to the Operation Controls section of this
manual before attempting to operate one for the first time.