Use and Care Manual
Table Of Contents
- Cover
- Warranty
- Table of Contents
- Introduction
- Uncrating & Assembly
- Symbols & Decals
- Safety Instructions 1
- Safety Instructions 2
- Safety Instructions 3
- Customer Responsibilities 1
- Charging Tips
- Customer Responsibilities 2
- Specifications
- Maintenance Schedule
- Operation & Features 1
- Operation & Features 2
- Operation & Features 3
- Operation & Features 4
- Service & Adjustments 1
- Service & Adjustments 2
- Service & Adjustments 3
- Service & Adjustments 4
- Wiring Schematics 1
- Wiring Schematics 2
- Wiring Schematics 3
- Frame Detail
- ROPS Detail
- Idler Detail 1
- Hydro Detail
- Engine Detail
- Deck Lift Detail
- Handle Detail
- Seat Detail
- Brake Detail
- Deck Detail
- Idler Detail 2
- Blade Driver Detail
- Fender Detail
- Wheel & Caster Detail
- Troubleshooting 1
- Troubleshooting 2
- Mower Identification
- Replacement Parts
- Swisher History
SERVICE & ADJUSTMENTS
Deck Belt Routing & Replacement
For replacement belt part number refer to Replacement Parts Quick Reference Chart in this manual.
Removal
Disconnect spark plug wire.
Apply parking brake.
Lower the deck to its lowest position.
Remove the belt covers.
Disconnect tension idler(s).
Roll the belt over the top of the deck pulleys.
To remove the Deck Idler belt the Engine-to-Deck
b
elt will need to be removed first.
Replacement
Install new belt by placing it around the deck pulleys. Refer to routing diagram below.
The belt will be loose at this time.
Tightly secure the belt tension back to its original position.
Reinstall the belt covers.
Check for sufficient tension on all belts.
Reconnect the spark plug.
Front of Unit (Top View)
19
19
1. Engine-to-Deck belt
2. Deck idler belt
3. Deck pulleys
4. Inside deck idler
5. Backside deck idler
6. Engine-to-Deck belt idler tensioner
7. Deck idler tensioner
8. Engine Clutch
5
6 33
24
1
8
7
Rotation