Use and Care Manual
Table Of Contents
- Cover
- Warranty
- Table of Contents
- Introduction
- Uncrating & Assembly
- Symbols & Decals
- Safety Instructions 1
- Safety Instructions 2
- Safety Instructions 3
- Customer Responsibilities 1
- Charging Tips
- Customer Responsibilities 2
- Specifications
- Maintenance Schedule
- Operation & Features 1
- Operation & Features 2
- Operation & Features 3
- Operation & Features 4
- Service & Adjustments 1
- Service & Adjustments 2
- Service & Adjustments 3
- Service & Adjustments 4
- Wiring Schematics 1
- Wiring Schematics 2
- Wiring Schematics 3
- Frame Detail
- ROPS Detail
- Idler Detail 1
- Hydro Detail
- Engine Detail
- Deck Lift Detail
- Handle Detail
- Seat Detail
- Brake Detail
- Deck Detail
- Idler Detail 2
- Blade Driver Detail
- Fender Detail
- Wheel & Caster Detail
- Troubleshooting 1
- Troubleshooting 2
- Mower Identification
- Replacement Parts
- Swisher History
27
27
Item # Part # Description Qty. Item # Part # Description Qty.
14398 Engine - 27HP B&S 1 19 NB180 Nut - Nyloc, 1/4-20 4
20 18696TK Bracket - Hydro Expansion Tank; Txt Blk 2
14391 Muffler - B&S V-Twin 1 21 26X249 Screw - 5/16-18 x 3/4 4
1 22 1002004 Solenoid - 3 Pole 1
226462 Deflector - Muffler, B&S 1 23 18709TK Weldment - Contnmnt. Rocker Shaft; Txt Blk 4
1 24 18614TK Plate - Deck Lift Pedal; Txt Blk 1
NB783 Screw - 10-16 x 3/4 1 25 NB596 Bolt - Serr Flange, 5/16-18 x 3/4; GR5, ZY 3
1 26 19115TK Weldment - Rocker Shaft, Front; Txt Blk 1
NB253 Bolt - Serr Flange, 5/16-18 x 1 1/4 4 27 19114TK Weldment - Rocker Shaft, Rear; Txt Blk 1
4 28 NB779 Nut - Serr Flange, 3/8-16; ZY 4
NB170 Nut - Serr Flange, 5/16-18 9 29 NB780 Bolt - Serr Flange, 3/8-16 x 3/4; GR5, ZY 4
4 30 18592 Weldment - Deck Height Stop Rod 1
7 9031 Key Stock - 1/4 x 1"; Under Size, Plain Fin. 1 31 NB184 Washer - 3/4ID x 1 1/4 OD x 10 GA. 2
8 18585 Pulley - Engine 1 32 NB126 Pin - Cotter, ⅛ x 1"; Carbon Steel 2
9 18632 Clutch - Ogura, 1" Shaft 1 33 2335 Spring - Tilt 2
10 18631 Bushing - Clutch, Ogura 1 34 18650TK Plate - Drag Link Capture; Txt Blk 2
11 10291 Washer - Bellville, 1/2 x 1 1/4 x 10GA; GR2 1 35 NB690 Bolt - Serr Flange, 1/4-20 x 3/4; GR5, ZY 8
12 NB705 Bolt - HCF, 7/16-20 x 3 1/4"; GR5, ZY 1 36 NB524 Nut - Serr Flange, 1/4-20: GR5, ZY 8
13 18691TK Cover - Hydro Fan; Txt Blk 2 37 NB651 Pin - Ball Lock, 1/2 x 2 1/2 1
14 NB114 Bolt - TCS, 1/4-20 x 1/2; Unslot, GR2, ZY 8 38 18602 Pin - Clevis 1/2 OD x 1-33/64 1
15 AS161 Hose - bulk, Oil Drain 2.5" x2 39 NB127 Pin - Hair, #39; Std, ZY 1
16 NB250 Bolt - 1/4-20 x 3/4; GR5, ZY 4 40 18667TK Bracket - Clutch Stop, Ogura; Txt Blk 1
17 NB274 Washer - SAE Flat, 1/4; ZY 4 41 10216 Bolt - Carriage, 5/16-18 x 3/4; GR5, ZY 2
18 17015 Tank Expansion - Hydro Resivoir (71328) 2 42 18883 Spacer - Clutch Stop 1
43 26X216 5/16-18 X 3/4 Rolock Hex 16
1
5
6
2
3
4
Engine shown may not be
the actual engine used. It
is for reference only.
Notes:
Torque settings for bolt number 12
should be set at 20 ft./lbs.
PARTS BREAKDOWN