Use and Care Manual

Item # Part # Description Qty. Item # Part # Description Qty.
1 NB175 Nut - Jam, 3/4-16; GR2 3 10 NB238 Bolt - 3/8-24 x 1; GR5, ZY 6
2 AS155 Washer - Belleville, 3/4 x 1 1/2 x .098 3 11 NB238N Bolt - HHc, 3/8-24 x 1; GR5, Nyloc 3
3 3785TK Pulley - Blade 5"; Txt Blk 4 12 NB607 Washer - SP Belleville, .413 x .945 x .118 3
4 NB179 3/4 ID X 1 1/4 OD 18 GA Washer 7 13 NB216 Nut - Two Way Lock, 3/8-24; GR A, ZY 6
5 B98 Bearing - Blade 6 14 NB690 Bolt - Serr Flange, 1/4-20 x 3/4; GR5 12
6 9077 Shaft - Blade 5", Long Shoulder 1 15 NB524 Nut - Serr Flange, 1/4-20; Case Hard, ZY 12
7 10539TK Blade Driver; Txt Blk 3 16 12823 Spacer - 3/4 ID x 1, Powder Metal 1
8 9008 Plate - Blade Mount 3 17 9078 Shaft - Blade 6", Long Shoulder 2
9 12509 Blade - 22.5" Mulching 3 18 18620 Spacer - Pulley, Deck Idler 1
PARTS BREAKDOWN
32
32
RIGHT BLADE DRIVER
LEFT BLADE DRIVER
CENTER BLADE DRIVER
Note:
Torques for bolt numbers 10 & 11
should be set at 35 ft./lbs.
Torque settings for nut number 1
should be set at 35 ft./lbs.