Use and Care Manual
Table Of Contents
- Cover
- Warranty
- Table of Contents
- Introduction
- Uncrating & Assembly
- Symbols & Decals
- Safety Instructions 1
- Safety Instructions 2
- Safety Instructions 3
- Customer Responsibilities 1
- Charging Tips
- Customer Responsibilities 2
- Specifications
- Maintenance Schedule
- Operation & Features 1
- Operation & Features 2
- Operation & Features 3
- Operation & Features 4
- Service & Adjustments 1
- Service & Adjustments 2
- Service & Adjustments 3
- Service & Adjustments 4
- Wiring Schematics 1
- Wiring Schematics 2
- Wiring Schematics 3
- Frame Detail
- ROPS Detail
- Idler Detail 1
- Hydro Detail
- Engine Detail
- Deck Lift Detail
- Handle Detail
- Seat Detail
- Brake Detail
- Deck Detail
- Idler Detail 2
- Blade Driver Detail
- Fender Detail
- Wheel & Caster Detail
- Troubleshooting 1
- Troubleshooting 2
- Mower Identification
- Replacement Parts
- Swisher History
REPLACEMENT PARTS
Quick Reference
CAUTION
Use extreme care when working on machinery.
Before performing any maintenance, turn off engine, allow the unit to cool and
remove the key. Disconnect spark plug wire.
Set Parking Brake by pulling up on both arms until locked into the “engaged”
position.
SEE PAGE 16 FOR BRAKE OPERATION INSTRUCTIONS.
Do not wear watch or jewelry. Do not wear loose fitting clothes. Observe all
common safety practices with tools.
38
38
Blade – Driver Assembly (Center
& Left)
12824
Blade – Driver Assembly (Right)10540
Fuse – 10 AmpAS069
Blade – 22 ½” Mulching 12509
Tire/Wheel – 12/600 x 6-4 Ply18785
Tire/Wheel – 20 x 10-10, Spoked18784
Belt – Deck Idler, ½ x 6219070
Belt – Engine to Deck ½ x 13019069
Belt – Hydro, ½ x 80 ¼18811
Part DescriptionSwisher Part #