INSTALLATION INSTRUCTIONS Swiss Madison Sublime One-Piece Toilet SM-1T205/SM-1T205BQ SM-1T206/SM-1T206BQ Share your pictures for a feature! using #SwissMadison www.swissmadison.com | 1-434-623-4766 | info@swissmadison.
Prior to Installation: Inspect toilet to ensure no damages have occurred while in shipping. Observe all plumbing and building codes in accordance with your state and local requirements. Remove old toilet. Make sure mounting surface is CLEAN and LEVEL. All dimensions are nominal! Be sure to measure your toilet prior to installation. General Recommendations: Read installation and maintenance instructions thoroughly before installing.
Thank you for your purchase! Thank you for purchasing a Swiss Madison One-Piece Toilet. We appreciate your business and know you will enjoy your toilet for many years to come. If you have any questions or require assistance we would be happy to help, please contact us at 1-434-6234766 or info@swissmadison.com. To learn more about our products, please visit: www.swissmadison.
ONE-PIECE TOILET MODELS 15 ¹⁄2” 7 ¹⁄4” 28” 28” 18 ³⁄4” 16” 12” Rough-in Sublime 28” x 15 ¹⁄2“ x 28” SM-1T205 - White SM-1T205BQ - Bisque 15 ¹⁄2” 7 ¹⁄4” 28” 28” 18 ³⁄4” 16” 12” Rough-in Sublime 28” x 15 ¹⁄2“ x 28” SM-1T206 - White SM-1T206BQ - Bisque — 3 —
ONE-PIECE TOILET ROUGH DIMENSIONS NOTE: Distance from wall to closest flange centerline must be listed as below. W” H” L” 12” Rough-in SUGGESTED TOOLS AND MATERIALS Safety Glasses Wrench Putty Knife Flexible Supply Tube Tape Measure Hacksaw Level Screwdriver PARTS LIST One-Piece Toilet Wax Ring/ Gasket Bolts Side Cover Caps NOTE: Specialized tools may be necessary to install a Swiss Madison One-Piece Toilet, plumbing not included.
ONE-PIECE TOILET INSTALLATION INSTRUCTIONS The step-by-step guidelines in the installation instructions are a general reference. Should there be any discrepancies, Swiss Madison cannot be held liable. It is recommended to install all Swiss Madison products by hiring a licensed professional 1. Read the complete instruction manual before beginning installation. 2. Confirm that your model will fit in intended location and plumbing fixtures are located where legally required before beginning installation. 3.
3. Install Closet Bolts Install closet bolts to flange channel, turn 90° and slide into place 6” (152mm) apart and parallel to wall. Closet Flange A Closet Bolts 4. Install Wax Seal Invert toilet on floor (use cushion to prevent damage), and install wax ring evenly around waste flange with tapered end of ring facing toilet. Apply a thin bead of sealant around toilet base. Wax Ring Sealant NOTE: Drawings may not exactly define contour of china.
5. Position Toilet on Flange Unplug floor waste opening and install toilet on closet flange so bolts project through mounting holes. Loosely install retainer washers and nuts. Side of washers marked “THIS SIDE UP” must face up! Nut SIDE UP THIS Washer Bolt Closet Flange 6. Install Toilet Position toilet square to wall and, with a rocking motion, press bowl down fully on wax ring and flange. Alternately tighten nuts until toilet is firmly sealed to floor.
7. Install Toilet Seat Place seat hardware over where you inserted the threaded rubber pieces. Insert threaded rubber piece into holes on top of toilet. Place washer onto screw then thread screw through seat hardware into the rubber piece. Before you fully screw in hardware, be sure to test position by placing the seat on top and making adjustments if needed. Add cover caps over top of seat hardware. Pop on your quick-release seat. NOTE: Drawings may not exactly define contour of china.
Swiss Madison ® ONE YEAR LIMITED WARRANTY 1-434-MADISON (623-4766) 19 Stults Road Dayton, NJ 08810 www.swissmadison.com Swiss Madison® products are made with quality materials and excellent craftsmanship to provide our customers with beautiful, durable, long-lasting products.
