Installation Sheet

4. Install Mounting Brackets

· Turn countertop over and align sink with countertop. Decide location for mounting brackets.

· Mounting holes should be drilled 1/2” from the edge of the sink.

· Install anchors into drilled holes and lightly tap with a hammer until flush with countertop.

· It is recommended to install faucet according to the manufacturers installation instructions at this point.

3. Cut Countertop

· Cut an opening in the countertop by carefully following the traced line from the template.

· Please use the appropriate saw that best fits your countertop material. Professional should be consulted for

cutting countertop.

1/2”

(13mm)

Mark holes

Drill holes

Install anchors

— 3 —

UNDERMOUNT KITCHEN SINK INSTALLATION INSTRUCTIONS