Installation Guide

SHOWER BASE INSTALLATION INSTRUCTIONS

5. Place drop cloth in bathtub and stand inside the shower base to press it to the oor when

securing to the wall studs.

Installing Shower Base

1. Re-insert shower base into shower cavity making sure that shower base drain and oor rough-in are

aligned.

2. Before laying down shower base, ll shower cavity with expanding foam in snake formation. Leave

6-8 inches from end of shower area empty of expanding foam.

3. Re-insert shower pan into shower cavity leaving 1/8” (use shims) between wood studs and shower

base on all sides.

4. Verify shower base is level using level tool on all 4 sides.

NOTE: Expanding foam generally settles within10-15 minutes.

Level

Side Flange

Top Flange

Wall Studs

1/8” gap

Square

Shim

 4 