Full Product Manual
Caulk Gun
— 1 —
If you have any questions or concerns please contact us:
1-434-623-4766
info@swissmadison.com
PRIOR TO INSTALLATION:
· Inspect shower base to ensure no damages have occurred while in shipping.
· Observe all plumbing and building codes in accordance with your state and local requirements.
· All dimensions are nominal! Be sure to measure your shower base prior to installation.
· The step-by-step guidelines in the installation instructions are a general reference. Should there be
any discrepancies, Swiss Madison cannot be held liable. It is recommended to install all Swiss
Madison products by hiring a licensed professional.
· Read installation and maintenance instructions thoroughly before installing. Be sure to use proper
tools and always wear proper personal safety accessories for your protection.
· Two people are recommended to handle and install this product.
· Make sure all wood studs and supports are properly installed.
· Verify all the necessary plumbing is installed by a certified plumber.
· Floor drain and trap are not included
.
· Do not use drywall screws to secure flanges to wall studs. Product damage will occur and will void
the warranty. Entire bottom support must be in contact with a flat, level surface.
SUGGESTED TOOLS & MATERIALS:
Tape
Measure
Level
SHOWER BASE INSTALLATION INSTRUCTIONS
Safety
Glasses
Pencil Shims
Wrench
Pliers
Screwdriver
Plastic Film
Sealant
(1 tube)