Installation Sheet

Plumbers
Grease
Flat File
1
If you have any questions or concerns please contact us:
1-434-623-4766
info@swissmadison.com
PRIOR TO INSTALLATION:
· Inspect carrier to ensure no damages have occurred while in shipping.
· Observe all plumbing and building codes in accordance with your state and local requirements.
· All dimensions are nominal! Be sure to measure your toilet prior to installation.
· The step-by-step guidelines in the installation instructions are a general reference. Should there be
any discrepancies, Swiss Madison cannot be held liable. It is recommended to install all Swiss
Madison products by hiring a licensed professional.
· Read installation and maintenance instructions thoroughly before installing. Be sure to use proper
tools and always wear proper personal safety accessories for your protection.
· Be sure to properly bleed all air from the piping system, trapped air can cause damage to the flushing
system and toilet bowl.
· Additional floor and wall preparations may be necessary to avoid damage to the product· Swiss
Madison recommends using a cement board or tile backer board for the wallboard backing, avoid
gypsum board as it may compromise the load strength of the toilet installation.
SUGGESTED TOOLS & MATERIALS:
Safety
Glasses
Wrench
Level
Hacksaw
Tape
Measure
Drill
WALL-HUNG CARRIER SYSTEM INSTALLATION INSTRUCTIONS