Full Product Manual

BACK-TO-WALL TOILET INSTALLATION INSTRUCTIONS
TOILET SEAT INSTALLATION
— 4 —
1. Dissassemble
· Disassemble the cover cap and the hinge.
2. Construct Hinges
· Insert screw and nut into the hole on the hinge.
· Attach blind hole screw fixing to the bottom of screw.
3. Attach Hinges
· Insert hinges with blind hole screw fixings
attached into holes on toilet bowl.
· Lightly tighten hinges with a screwdriver to
allow for later adjustment.
Pull
4. Adjust and Cover Hinges
· Be sure the hinge is all the way forward for proper
seat fitting.
· Place the covers onto the hinges.
or
Incorrect: Correct: