Wall-Mount Sink INSTALLATION INSTRUCTIONS @SwissMadison #WellMadeForever www.swissmadison.com | 1-434-623-4766 | info@swissmadison.
WALL MOUNT SINK INSTALLATION INSTRUCTIONS PRIOR TO INSTALLATION: · Inspect sink to ensure no damages have occurred while in shipping. · Observe all plumbing and building codes in accordance with your state and local requirements. · All dimensions are nominal! Be sure to measure your sink prior to installation. · The step-by-step guidelines in the installation instructions are a general reference. Should there be any discrepancies, Swiss Madison cannot be held liable.
WALL MOUNT SINK Anchor INSTALLATION INSTRUCTIONS Metal Screw Plastic Gasket Metal Gasket Metal Nut 1. To install the towel bar, align the bracket with the pre-drilled holes on the bottom of the sink. Using the two (2) provided screws and washers, secure the bar to the sink base. After the towel bar isfirmly in place, you may attach the two (2) provided screw covers for a seamless finished look. 1a. Locate studs in the wall.
WALL MOUNT SINK INSTALLATION INSTRUCTIONS 2. Push an anchor into each hole. 3. Screw a fixing bolt into each fixing plug using a 8 mm spanner until the spanner contacts the wall. 4. Place the basin in position against the wall. Locating the fixing bolts through the holes in the rear of the basin. Push a plastic washer followed by a metal washer, onto each fixing bolt. 5. Screw metal nut onto each fixing bolt to secure the basin. Do not overtighten, as this may damage the ceramic. 6.
well made forever ONE YEAR LIMITED WARRANTY 1-434-MADISON (623-4766) www.swissmadison.com Swiss Madison products are made with quality materials and excellent craftsmanship to provide our customers with beautiful, durable, long-lasting products.
