well made forever Floating Bathroom Shelf with Vessel Sink INSTALLATION INSTRUCTIONS www.swissmadison.com | 1-434-623-4766 | info@swissmadison.
INSTALLATION FLOATING BATHROOM SHELF WITH VESSEL SINK PRIOR TO INSTALLATION: · Inspect product to ensure no damages have occurred while in shipping. · Observe all building codes in accordance with your state and local requirements. · All dimensions are nominal! Be sure to measure your floating bathroom shelf prior to installation. · The step-by-step guidelines in the installation instructions are a general reference. Should there be any discrepancies, Swiss Madison® cannot be held liable.
INSTALLATION FLOATING BATHROOM SHELF WITH VESSEL SINK INSTALLATION: 1a • Locate studs in the wall. If studs do not line up with the shelf mounting holes, additional support backing is needed behind the finshed wall. 1b • 2 • Release the nuts, and push an anchor into each hole. 3 • 4 • Mark the drill holes for the faucet and basins drain, drill with different dry diamond hole saws. 5 Measure the distance between the center of each mounting hole on the back of the racks.
FLOATING BATHROOM SHELF WITH VESSEL SINK 6 Install Faucet • 7 Install faucet (not included) according to manufacturer’s instructions.. Install Sink • • • • • Check alignment of the sink to the opening in the countertop. Use a bead of clear silicone (or preferred adhesive) around the underside of the sink. Carefully place the sink on the countertop, align, and press firmly. Allow sealant to set above 60 minutes. Use acetone or denatured alcohol to remove any excess sealant after application.
1-434-MADISON(623-4766) | www.swissmadison.com ONE YEAR LIMITED WARRANTY Swiss Madison® products are made with quality materials and excellent craftsmanship to provide our customers with beautiful, durable, long-lasting products.