Installation

— 2 —
5. Connect Supply Hose
· Thread the supply hose onto the tank.
6. Attach Gasket
· Position the gasket on the bowl inlet.
TWO-PIECE TOILET INSTALLATION INSTRUCTIONS
Wax Ring
Sealant
3. Install Closet Bolts
· Install closet bolts to flange channel, turn 90° and
slide into place 6” (152mm) apart and parallel to wall.
2. Rough-In the Toilet
· Measure the wall from behind the toilet to the
middle of the closet bolt. Your rough-in
measurement should be 12”.
4. Install Wax Seal
· Invert toilet on floor (use cushion to prevent
damage), and install wax ring evenly around waste
flange with tapered end of ring facing toilet. Apply
a thin bead of sealant around toilet base.
1. Turn Off Water Supply
· Close toilet supply valve and flush tank
completely, use towel to remove excess water.
· Disconnect and remove supply line, if you are
replacing the valve shut main water supply first.
· Remove closet bolts from flange and clean wax
and putty from base area.
Closet Flange
Closet Bolts
Rough-in