Installation

— 3 —
7. Position Tank onto Bowl
· Holes should line up so threaded rod can fit
smoothly connecting the cistern body to the bowl.
Rubber Washer
Metal
Washer
TWO-PIECE TOILET INSTALLATION INSTRUCTIONS
8. Secure Tank to Bowl
· Slide metal washer and rubber washer onto the bolt.
· Thread bolts into the bottom of the tank then tighten
the bolts using a screwdriver.
· Do not overtighten, this may crack the ceramic.
9. Position Toilet on Flange
· Unplug floor waste opening and install toilet on
closet flange so bolts project through the
mounting holes.
· Loosely install retainer washers and nuts.
Nut
Washer
Bolt
10. Install Toilet
· Position toilet square to wall and, with a rocking
motion, press bowl down fully on wax ring and flange.
Alternately tighten nuts until toilet is firmly sealed to
floor. Do not over-tighten nuts, it might crack ceramic.
· Smooth off the bead of sealant around the base.
Remove excess sealant.
· Place cover caps to hide installation holes on toilet.
· Connect water supply to shut off valve, and check for
leaks. Tighten if necessary.