Installation

— 4 —

TWO-PIECE TOILET INSTALLATION INSTRUCTIONS

12. Connect Plumbing

· Connect water supply.

³⁄8” Supply

13. Connect Push Button

· Unscrew the big white nut on the push button and

insert the button into the hole on the tank.

· When the rods meet the push buttons, measure the

height (H) with a ruler.

· Unscrew the rods and cut the part H on both rods.

· Insert the rods back and tighten the small nut.

· Tighten the big nut from the inside of the tank.

Push Button

Rubber Sleeve

Small Nut

Tank Cover

11. Secure Tank

· Using screws and washers affix tank to wall.

· Tighten to secure in place, do not over tighten.

14. Check for Leaks

· Flush several times and check for leaks.