Bidet INSTALLATION INSTRUCTIONS Swiss Madison @SwissMadison #WellMadeForever www.swissmadison.com | 1-434-623-4766 | info@swissmadison.
BIDET INSTALLATION INSTRUCTIONS PRIOR TO INSTALLATION: · Inspect bidet to ensure no damages have occurred while in shipping. · Observe all plumbing and building codes in accordance with your state and local requirements. · All dimensions are nominal! Be sure to measure your bidet prior to installation. · The step-by-step guidelines in the installation instructions are a general reference. Should there be any discrepancies, Swiss Madison cannot be held liable.
BIDET INSTALLATION INSTRUCTIONS BACK-TO-WALL INSTALLATION: 1. Rough-In · For a side by side toilet/bidet installation, it is required to have a separation of 24” (610mm) between units. · Trap is not included. For installation of a trap in the floor, provisions must be made. · Water supplies need to be at least 6” (152mm) to the left and right of the bidet center line. · The correct drain center will need to be drilled through the floor and sleeved (9” from finished wall) in the center of bidet.
Swiss Madison ® ONE YEAR LIMITED WARRANTY 1-434-MADISON (623-4766) 19 Stults Road Dayton, NJ 08810 www.swissmadison.com Swiss Madison® products are made with quality materials and excellent craftsmanship to provide our customers with beautiful, durable, long-lasting products.
