Installation Instructions

— 4 —
• Fasten a mounting block at desired height above your sink. Be sure it is set to the proper depth for finished
wall material.
• Position the concealed body and mark the mounting block.
• Once this is established, you can fasten and mount the faucet body to the mounting block. Secure firmly.
1. Mark Mounting Plate and Fix Concealed Body
• Connect water supply pipes after tightness testing.
• Put on all the plastic guards, making sure the thickness of the tile is 2.36” - 3.54”.
After fitting, the thickness of the tile should be within adjustable range.
NOTE: If soldering or using heat on the faucet body, make sure internal parts are removed prior.
2. Test Tightness and Place Plastic Guards
BATHROOM FAUCET INSTALLATION INSTRUCTIONS
Hot
Water
Cold
Water
Mounting
block
marks
3 Ø 6mm