Installation

VANITY INSTALLATION INSTRUCTIONS
2. Install Vanity Base
· Secure vanity base to the wall in your
desired location.
NOTE: Use wall anchors along with
included hardware.
3. Install Faucet and Drain
· Following manufacturer's instructions,
install drain and faucet onto vanity top.
4. Apply Adhesive
· Using your chosen adhesive, apply a bead of
silicone around the rim of the console base.
5. Secure Sink
· Carefully lower sink into place so that it is
resting on the vanity base.
· Press sink firmly into place and wipe away
excess sealant with a damp cloth.
· Allow for adhesive to cure for 24 hours.
NOTE: Curing time may differ depending on
which adhesive you use. Be sure to check
the instructions on your adhesive prior to use.
— 5 —
NOTE: Drawings may not exactly define contour of china.