Installation

Studs must be
SHOWER BASE INSTALLATION INSTRUCTIONS
L
W
L
W
10”
10”
Rough-In
CAUTION: DO NOT
damage will occur and will void the warranty.
1. Read the complete instruction manual before beginning installation.
2.
located where legally required before beginning installation.
3. Not all drawings on this manual are drawn to scale. Please refer to the model chart.
5. Always use drop cloth to protect shower base from damage during installation.
6. Two people are recommended to install and move this product.
Dimensions given during roughing-in are crucial for a proper installation.
Rough plumbing must be pre-installed by a licensed plumber before shower base installation.
Stud opening tolerance is
+1/4” and -1
Roughing-in
•
If oor drain-hole installation is needed, contact a licensed plumber.
•
10” x 10” Floor cut-out
Wall studs
4
NOTE: This manual shows our recommended installation method,
your installation require another method and you should consult a professional prior.
NOTE: All measurments are nominal.