Cascade Vessel Sink & Waterfall Faucet INSTALLATION INSTRUCTIONS Swiss Madison @SwissMadison #WellMadeForever www.swissmadison.com | 1-434-623-4766 | info@swissmadison.
VESSEL SINK & FAUCET INSTALLATION INSTRUCTIONS PRIOR TO INSTALLATION: · Inspect products to ensure no damages have occurred while in shipping. · Observe all plumbing and building codes in accordance with your state and local requirements. · All dimensions are nominal! Be sure to measure prior to installation. · The step-by-step guidelines in the installation instructions are a general reference. Should there be any discrepancies, Swiss Madison cannot be held liable.
VESSEL SINK INSTALLATION INSTRUCTIONS 1. Install Base Ring 2. Place Sink · Put the upper part of the drain into the drain hole, then install the rubber pad between the drain and the sink. · Align the sink ring on top of the drain hole in the countertop and place the sink into the hole. Rubber pad 3. Tighten Sink into Position · Put the rubber ring on the bottom half of the drain that is under the counter, then put on the nut and tighten. 4.
WATERFALL FAUCET INSTALLATION INSTRUCTIONS 1. Connect Faucet · Connect the hot and cold water inlet pipes and tighten them to the bottom of the faucet. · Put the small, round, rubber ring on the round edge of the indented curve. 3. Secure Faucet · Adjust the direction of the faucet and install the U-shaped rubber pad around the bolts and water inlet pipes. 2. Position Faucet · Screw in both bolts about a quarter of the way into the bottom of the faucet.
Swiss Madison ® ONE YEAR LIMITED WARRANTY 1-434-MADISON (623-4766) 19 Stults Road Dayton, NJ 08810 www.swissmadison.com Swiss Madison® products are made with quality materials and excellent craftsmanship to provide our customers with beautiful, durable, long-lasting products.