Vanity Manual Ceramic 24

NOTE: Drawings may not exactly dene contour of china.
6
4. Secure Sink
Carefully lower sink into place so that it is resting on the vanity base.
Press sink rmly into place and wipe away excess sealant with a damp cloth.
Allow for adhesive to cure; this is dependent upon which adhesive you choose to use. Be sure to check the
instructions on your adhesive prior to use.
5. Install Plumbing Fixtures
Connect drain, trap to drain, and water supply connections to the faucet according to manufacturers instruction.
Run water and check for leaks.
6. Installing Plumbing Fixtures
Wipe away any excess.
Apply a bead of caulk along the back edge of the sink against the wall.