SM WC426 Carrier Manual min

— 3 —
A
A
B
B
B
A
A
A
W=5 ¹⁄2”
W=6 ¹9⁄64”
2. Fasten Mounts
· After adjusting bowl height, fasten four mounts (A).
· Screw carrier to wood framing flush across the front.
NOTE: It is recommended to use 2 1/2” screws and 1 1/4” fender washers (4 of each total).
· Ensure frame is flush and level before fastening.
3. Connect Discharge Pipe
· Find the center of the discharge pipe before fastening. Drill a 3 5/8” hole through framing for
later installation.
· Once discharge hole is drilled through framing, connect bracket as shown.
WALL-HUNG CARRIER SYSTEM INSTALLATION INSTRUCTIONS