Manualshelf

Wall Mount Sink Installation 1f6a147c 500a 4aa5 8258 3a156fa9b985

ManualsBrandsSwiss Madison ManualsPlumbingVoltaire Collection SM-WS316 19.69" x 9.81" x 5.5" Wall Mounted Single Bowl Bathroom Sink with Right Side Faucet Mount Holes in White Color
1234
— 2 —
1. Drill two holes in the required position on the wall using a
14 mm masonry drill bit, to a depth of 75 mm.
3. Screw a fixing bolt into each fixing plug using a 8 mm
spanner until the spanner contacts the wall.
4. Place the basin in position against the wall. Locating
the fixing bolts through the holes in the rear of the basin.
Push a plastic washer followed by a metal washer, onto
each fixing bolt.
5. Screw a metal nut onto each fixing bolt to secure the basin.
Do not overtighten, as this may damage the ceramic.
6. Ensure sink it secure, tighten bolts if necessary.
Install faucet and drain using manufacturer’s instructions.
2. Push an anchor into each hole.
NOTE: These fixings are suitable for solid walls only. Plasterboard or stud walls may require specialist fixings (not supplied).
CAUTION: Care should be taken when drilling walls and floors to avoid any concealed wires or pipes.
Anchor Metal Screw Plastic Gasket Metal Gasket Metal Nut
WALL MOUNT SINK INSTALLATION INSTRUCTIONS