Hardware Manual

Hardware Manual / EQU RTK
Swiss Timing, Ltd. Version 1.1 Page 12 of 23
RTK_EQU_Tracking_System_Hardware-Manual.docx
7 RTK EQU CHARGING CASE
The RTK EQU Charging Case is provided for transporting, storing and simultaneously charging of up to 30
EQTracker. For this reason, the case is equipped with 30 charging slots. Each EQTracker needs to be charged for
approx. 3 hours. When the RTK EQU Charging Case is connected to a suitable power, its red status LED
illuminates.
If the RTK EQU Charging Case is stored over a long time period (e.g. between racing seasons), it should always be
disconnected from the power source. If it is not possible to disconnect the power supply via the power cable, the
fuse can be unscrewed and removed. The fuse is located between the plug for the power cable and the LED light,
directly on the case.
Figure 9: EQU RTK Charging Case
7.1 Specification
Attribute
Value
Input voltage
90 – 250 VAC
Output voltage (per charging slot)
5 VDC, isolated
Protection
IP 54
Dimensions (WxHxD)
48.6 x 35.7 x 17.6 cm
Weight
6.0 kg (empty) / 9.8 kg (fully equipped)
Housing
watertight, crushproof, dustproof