Hardware Manual

Hardware Manual / EQU RTK
Swiss Timing, Ltd. Version 1.1 Page 2 of 23
RTK_EQU_Tracking_System_Hardware-Manual.docx
2 SCOPE OF SUPPLY
2.1 Standard Scope
The following components are part of the RTK EQU Tracking System for horse racing. Their individual installation
and mounting procedures will be covered within the following sections of this document.
 1x GPSRadio32V2 designated as RTK Base Station
 Up to 4x GPSRadio32V2 designated as RTK Transceiver
 60x EQTrackerV4 (per standard)
 2x RTK EQU Charging Case (one charging case for 30 EQTrackerV4 each)
 Required cables and antennas
2.2 Optional Parts
The standard scope can be extended by a GPS TIMEsync. This device adds a valid GPS timestamp to an incoming
starting. Detailed information about this can be found in chapter 8.
2.3 Purchased Parts
The following parts are absolutely necessary for a proper operation. But these parts must be purchased
separately. They are not produced by our company. But the parts belong to the scope of supply and are provided
by Swiss Timing. The following documents are the technical instructions of the external suppliers:
 Operator Laptop with EQTracker Software