manual

1615
English
Example installation
The Universal Connection Kit wireless UNO serves as a peripheral device to an existing
Universal Connection Kit DUO. There are two situations in which the UNO device can be used:
Connecting to the Internet in an
additional room
Thanks to the Universal Connection
Kit UNO, you can connect up to
four devices in another room to the
Internet via Ethernet connection
(for example the Swisscom TV-Box,
a computer or a game console).
Increasing the range
As an additional option, the range
of an existing Universal Connection
Kit DUO can be increased by
positioning the UNO between the
two DUO devices of the Universal
Connection Kit.
WPS
UNO
WPS
WPS
DUO
DUO
Router
TV-Box
WPS
UNO
WPS
WPS
DUO
WPS
WPS
DUO
Router
TV-Box
TV-Box
Already existing installation
Setting up the Universal Connection Kit UNO
(connecting to the Internet in an additional room)
Preparation: Connecting the new Connection Kit UNO
1. In the room in which the router is located, connect the UNO device to the mains
and position it at a distance of three metres from the existing DUO device.
Wait two minutes until the device flashes.
2. 2.a Press the WPS button (
WPS
) on the existing DUO device (next to the router) and then
on the new UNO device a few seconds later (2.b).
The connection LEDs ( ) start to flash and the devices connect automatically.
This process will take five minutes. The connection has been established once
the lights up green.
Note: If the connection LED on the UNO device does not light up green within five
minutes, please repeat step 2.
Setting up the Connection Kit UNO in the room of your choice
3. The UNO device can now be unplugged and placed next to the device that you would like
to connect to the Internet (in this example, the TV-Box in another room).
4. Connect the device to the TV-Box using the Ethernet cable (yellow plug). The wireless
connection will be established automatically. This process will take up to five
minutes. Once the connection LED ( ) lights up green, the connection has been
established and the TV-Box is connected to the Internet.
Note: If the connection LED do not light up green within five minutes, please consult the
chapter entitled «Troubleshooting» (page 17).
2 min.
DUO UNO
WPS
WPS
2.a
2.b
1.
3 meters distance
Existing installation
Router
5 min.
5 min.
4.
Power HDMI SCART ou t Reset
Restore
factory
default
settings
Optical
12V DC
1.5A
L
R
Audio Video Digital Audio
USB/eSATA
LAN
IR
on
off
TV-Box
Power On/Off
1 2 3 4
UNO