User manual

In case you hear unsolicited tones, press the transport buttons ‘back’ and ‘forward’
simultaneously to activate the Panic function. The Panic command is transmitted to
all ports via all channels and resets all notes and controls. The display shows the mes‐
sage ‘PANIC’.
The Panic function is not supported by all MIDI devices.
The device's current firmware can be found on our website (www.thomann.de) on the
page relating to the device in question, in the "Update" section.
This process only works for computers with the MS Windows operating
system.
1. Download the exe file with the update tool for your device from our website to
your computer.
2. Switch off the device.
3. Connect the device via the USB interface to your computer.
4. To enter Update mode, hold function buttons [A1] and [A2] down and switch
the device on.
5. Start the downloaded update tool on your computer and follow the tool's
instructions.
Panic function
Firmware update
Functions
MIDI keyboard
18