User manual

5. Under ‘Internet’ , select the type of access to the network.
With ‘Dynamic IP’ , the router is automatically assigned an available dynamic IP address
by the ISP's DHCP server (Dynamic Host Conguration Protocol).
Select ‘Static IP’ if your Internet service provider has provided you with a xed IP
address. The values for ‘IP Address’ , ‘Subnet Mask’ and ‘DNS’ are available from your
Internet service provider.
PPPoE (Point-to-Point Protocol over Ethernet) is a virtual, private protocol and enables
encapsulated data transport. Select ‘PPPoE’ if your internet service provider oers this
option. User name and password are available from your internet service provider.
PPTP (Point-to-Point Tunneling Protocol) is a virtual, private protocol that is used to set
up a Virtual Private Network (VPN) in a computer network. Select ‘PPTP’ if your internet
service provider oers this option. User name and password are available from your
internet service provider.
L2TP (Layer 2 Tunneling Protocol) is a network protocol that tunnels frames of data link
layer protocols of the OSI model through routers between two networks over an IP net‐
work. Select ‘L2TP’ if your internet service provider oers this option. User name and
password are available from your internet service provider.
6. Conrm with ‘Next’ .
Installation and starting up
Professional Router 2 MKII
21
Router