User manual
Table Of Contents
1 [INPUT 1 / INPUT 2]
Microphone and instrument input e.g. for guitar or bass, designed as XLR / 1/4" combo sockets
2 Control for setting the input level
3 [PEAK]
The LED lights up green when the input level on the respective input is sucient, and lights up red when the input
level is too high. The control for adjusting the input level can be used to set it correctly.
4 [HI-Z]
Push-button to select the input sensitivity (line or microphone level).
5 [+48 V]
Switches the phantom power for the power supply for the condenser microphones on (button pressed) or o
(button not pressed).
The phantom power leads to damage to the device if unbalanced cables are connected. Only switch on phantom
power while exclusively balanced cables are connected.
Connections and controls
UA-2X2
21