User manual

6.2.1 Latency setting

Before the audio application is started, the latency period must be set to avoid undesired

delays in the transmissions.

In the [Cong] menu item, the latency period for the US audio driver is set under [Latency].

A shorter latency period is achieved by selecting a smaller buer. A latency period between

4 ms and 8 ms is usually sensible for recording applications, and it is typically displayed on the

control panel.

The computer's processing power should be taken into account for this setting. The faster the

processor works to maintain the the next signal for conversion within the buering time of the

whole system or to send the signal for recording, no audible delay will occur. A gap will result if

the processor is slow. The converters lack information and the next sample of the recording

will not be saved.

Operating

UA-2X2