User's Manual
Table Of Contents
- 1. Putting into Operation your pager 2
- Overview
- Standby Mode
- Message Icons Display
- Status Symbols
- Menu
- Programming option: Simplified Operation
- Menu Symbol: Display Text: "Back ?"
- Menu Symbol: Display Text: "File message ?"
- Menu Symbol: Display Text: "Delete message ?"
- Menu Symbol: Display Text: "Protect message ?"
- Menu Symbol: Display Text: "Set clock ?"
- Menu Symbol: Display Text: "Set alarm clock ?"
- Menu Symbol: Display Text: "Silent ?"
- Menu Symbol: Display Text: "Loud ?"
- Menu Symbol: Display Text: "Submenu ?"
- Menu Symbol: Display Text: "Turn off ?"
- Switching on
- Sub-menu
- Interface/Periphery
User manual DE 506 PMD 000 098 08/02 Page 18/16
8.
Interface/Periphery
8.1. Accessories
Following units can be used for the DE506 pager:
LG 505/510 Simple charging device.
LGA 505/510 Charging device with an antenna connection.
LGR 505 Charging device with an external message signalling
(e.g. dry contact for a light switch).
LGRA 505 Charging device with an antenna connection and an external
message signalling (e.g. dry contact for a light switch).
LGL 505 charging device LGRA 505 with an additional LED for message
signalling.
SG 505 Periphery unit enabling communication with a PC or a serial printer.
Attention:
All the pagers must be loaded with rechargeable Nickel Cadmium or Nickel Metal
Hydride accu, before they are inserted in any of above units.
Make sure that the pagers are not loaded with alkaline (dry) cells when
recharging.
Customer service
This pager is a high quality product. Nevertheless, should there be any problems
even after observing the operating instructions, please contact your nearest
customer service centre.
Customer service address: