Installation Guide
CLEAN
Clear the space and thoroughly sweep the subsurface.
STEP 1
Facing the garage door, lay the first tile and edge in the front, le
corner. The tile should be positioned with the loops facing the back
wall of the garage and the right side wall.
STEP 2&3
Build the first row of tile and ramp
edging along the front of garage
opening working le to right, then
front to back.
REMEMBER
Leave an expansion gap of ¼”
to ½” along all walls and other
stationary objects.
Be sure the rubber seal on the
bottom of the garage door
contacts garage floor not the
tile.
STEP 4
Continue filling in the remaining
area to be covered working in a
‘L’ shape from le to right then
front to back.
TRIM
Trim any tiles as needed and
attached all ramps.
3
STEP
2
STEP
4
STEP
CLEAN
1
STEP
MODULAR FLOORING TILE
Installation Instructions