Operating instructions

Handset settings
• Press , select HS Settings and press OK.
• Select a function from the following list:
- Alarm – The activated alarm is displayed in standby mode by .
The alarm sounds for 30 seconds or can be deactivated immediately by pressing
any key. The volume is the same as for the ringtone.
-
Ring Setup – Select the desired ringer melody for internal and external calls.
-
Tone Setup – Activate or deactivate the following options:
Key Tone – Every time a key is pressed, a brief beep is heard.
Battery Tone – The batteries are almost empty. Insert the handset in the
base station for charging.
Out of Range – A warning beep is sounded if you exceed the maximum
range.
- Language – Choose the language for the display texts.
- Rename HS – To better distinguish between handsets, you can give each hand-
set a name.
-
HS display – Select time or handset name for idle mode display.
- Auto Answer – Just pick up the handset from the base to answer a call (without
pressing any key).
- Date & Time – Set the desired date and time format and enter date and time.
Base station settings
The system PIN on delivery is 0000.
• Press , select
BS Settings and press OK.
• Select a function from the following list:
- Delete HS – Select the handset you want to deregister.
- Dial Mode – Tone: Normal dialling procedure on analog lines. Pulse: May be
required for connecting older telephone systems. Please refer to the relevant
documentation.
- Flash Time – Select short , medium or long .
- Change PIN – You can modify the PIN code (0000 on delivery).
Reset
• Press , select Default and press OK.
• Enter the PIN code (0000 on delivery).
• Confirm twice to reset your phone.
Aeris 124
Aeris 124 59