User manual

ePure TAM 2nd generation
10 ePure TAM 2nd generation
Set alarm tone
● Press , select Clock/Alarm using the navigation key
+/- and press OK.
● Select Alarm Tone using the navigation key +/- and press
OK.
● Select the desired alarm melody and press OK.
The activated alarm is displayed in standby mode by .
The alarm sounds for 30 seconds or can be deactivated
immediately by pressing any key. (If press navigator key, the
alarm will on again in 10 minutes)
Set auto clock
The alarm sound changed to 30 seconds from 60s. If set to ON,
the date/time can be updated by CID; if set to OFF, it cannot be
updated by CID.
Keypad lock
Activate keypad lock
● Press approx. 3 sec. Keys Locked. All keys are locked.
Deactivate keypad lock
● Press approx. 3 sec.
Redial
The Redial list contains up to 10 entries.
● Press and select the desired entry using the navigation
key +/-.
● Press the Talk key.
Edit redial list
● Open the Redial list, press OK.
You have the following options:
- Save Number – Add number to the phonebook.
- Delete – Delete the entry.
- Delete All – Delete the entire redial list.